Joysticks


My joystick is not lighting up. What should I do?

Try the following:

  1. Make sure that your equipment is turned on.
  2. Make sure that the all cables are attached securely.
  3. Make sure that your equipment is fully charged.

Why are the lights on my joystick flashing?

Please make sure that you are not doing one of the following that will cause the joystick lights to flash:

  1. Make sure that you did not move your equipment too quickly after turning it on as the joystick lights need to cycle before moving your equipment.
  2. Make sure that your equipment is not charging as it will not move while charging.

If the problems continue after following these steps, please contact us at 1-877-581-3733.

How do I lock or unlock my joystick?

VSI, VR2, and GC

Locking

  1. While equipment is on, press and hold the on/off button until you hear a beep.
  2. Push the joystick forward and hold for 2 seconds or until you hear a beep.
  3. Push the joystick backward and hold for 2 seconds or until you hear a beep.
  4. Release and there should be a long beep tone, signaling that it is locked

Unlock

  1. Turn on the equipment.
  2. Push the joystick forward and hold for 2 seconds or until you hear a beep.
  3. Push the joystick backward and hold for 2 seconds or until you hear a beep.
  4. Release and there should be a long beep tone, signaling that it is unlocked

Dynamic and Flight

Lock

Hold the On/Off button down for 4 seconds will lock the joystick. The LEDs will flash briefly and the horn will sound a short beep.

Unlock

Lock Mode will be indicated by all LEDs flashing briefly and the information gauge LEDs chasing slowly from right to left. If this occurs, press the horn button 2 times within 10 seconds to unlock the joystick.

If you need additional information, please contact us at 1-877-581-3733.